Skip links

EEM 5.2-3 Power grid synchronisation 300W

Alpha Technical Solutions Inc.

EEM 5.2-3 Power grid synchronisation 300W

In mains synchronization, the unloaded generator is connected to the mains power grid. Voltage, frequency and phase-angle have to coincide with the corresponding variable on the mains power grid. To measure these variables, a variety of different measuring instruments are used. The variables are set by means of the generator speed and generator excitation.

Training contents:

  • Manual mains synchronization is performed using the bright method, dark method and three-lamp synchronization circuits
  • Mains synchronization using the two-range frequency meter, two-range voltmeter, Synchronoscope and zero-voltage meter
  • Influence of generator speed
  • Influence of generator excitation
  • Adjusting energy flow by means of the drive
Supplementary equipment set to synchronous machine, consisting of:
1
Motor protection switch, 0.45 - 0.63A
Motor protection switch, 0.45 – 0.63ACO3212-1J
1
Synchronization Unit
Synchronization UnitCO3212-6V
Media:
1
Interactive Lab Ass.: Sync. machines, synchronisation reluc. machines 0.3 kW
Interactive Lab Ass.: Sync. machines, synchronisation reluc. machines 0.3 kWSO2805-1G
Additionally required, dynamic servo machine test stand:
1
Dynamic servo machine test system for 0.3kW machines incl. software ActiveServo
Dynamic servo machine test system for 0.3kW machines incl. software ActiveServoCO3636-6X
1
Rubber coupling sleeve for 300W machines
Rubber coupling sleeve for 300W machinesSE2662-2A
1
Coupling guard with LED lighting for 300W machines
Coupling guard with LED lighting for 300W machinesSE2662-7C
Power supply:
1
Three-phase supply for electrical machines
Three-phase supply for electrical machinesCO3212-5V
Measuring instruments:
1
Power-Multimeter
Power-MultimeterCO5127-2A
Accessories:
1
Set of safety measurement cables, 4mm, 31 pcs
Set of safety measurement cables, 4mm, 31 pcsSO5148-1L
20
Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT IISO5126-3R
2
Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT IISO5126-3V
2
Safety connecting plug 4mm with tap (2x), gr/ye, 1000V/32A CAT II
Safety connecting plug 4mm with tap (2x), gr/ye, 1000V/32A CAT IISO5126-3W
1
Mobile aluminum experiment stand, 3 levels, power strip with 6 sockets,(1250 x 1970 x 700 mm)
Mobile aluminum experiment stand, 3 levels, power strip with 6 sockets,(1250 x 1970 x 700 mm)ST7200-4C
1
Protected power distribution for working stations
Protected power distribution for working stationsST8008-8N
1
Monitor holder for flat screen monitor of weight up to 15kg/33lbs
Monitor holder for flat screen monitor of weight up to 15kg/33lbsST8010-4T
1
Keyboard adapter for flat screen monitor holders
Keyboard adapter for flat screen monitor holdersST8010-4G
1
Protection cover for three-level experiment trolleys
Protection cover for three-level experiment trolleysST8010-9Y
This website uses cookies to improve your web experience.