- Products
Download & Media:
Download & Media:
IMS 5 PROCESSING
A workpiece carrier is located on the conveyor belt. It is loaded with a fully assembled two-component workpiece (top and bottom pieces). The carrier and its load are positioned beneath the process module. The workpiece is clamped for processing. A bolt from the gravity-feed magazine is pressed into the hole in the workpiece. The clamp opens and the carrier and load are conveyed to the end of the belt to be passed on to the next sub-system.
Training contents:
- Assembly, set-up and testing of pneumatic cylinders and valves
- Introduction to sub-systems for workpiece substructures
- Defining processes for sorting
- Programming of production sequences in manual and automatic modes
| Equipment set comprising the following: | ||||
|---|---|---|---|---|
| 1 |  | Cyber physical conveyor system with PLC | LM9515 | |
| 1 |  | Processing station | LM9682 | |
| 1 |  | IMS displacement measurement module | LM9677 | |
| 1 |  | Symmetrical workpiece transport pallet | LM9532 | |
| 1 |  | Workpiece, top section, white | LM9521 | |
| 1 |  | Workpiece, bottom section, black | LM9525 | |
| 3 |  | Bolt workpiece, metal | LM9527 | |
| 3 |  | Bolt workpiece, plastic red | LM9528 | |
| Accessories: | ||||
|---|---|---|---|---|
| 1 |  | DC power supply 24 V/5 A for IMS conveyor belts | LM9672 | |
| 1 |  | Interface cable 25-pin, Sub-D socket / plug 1m | LM9066 | |
| Media: | ||||
|---|---|---|---|---|
| 1 |  | Interactive Lab Assistant: IMS 1 Cyber Physical Conveyor Belt System | SO2805-5H | |
| 1 |  | Interactive Lab Assistant: IMS X Mechatronic Basic Stations | SO2805-5X | |
| 1 |  | QuickChart IMS 1.5 Cyber-physical conveyor belt system | SO6200-2P | |
| 1 |  | QuickChart, IMS 5 Mechatronics Process sub-system | SO6200-1E | |
| Additionally recommended: | ||||
|---|---|---|---|---|
| 1 |  | Compressor, low-noise | SE2902-9L | |
| 1 |  | Tubing and accessory set for mechatronics systems | LM9571 | |
| 1 |  | Set of Allen keys | LM9716 | |
| 1 |  | Mechatronics experiment trolley with 2 level frame 1200x760x900mm WxHxDxD | ST7200-3T | |
| 1 |  | Monitor holder for flat screen monitor of weight up to (10kg / 22lbs) | ST8010-4K | |
| 1 |  | Protective cover for 1200mm wide IMS experiment trolleys with training panel | ST8010-8L | |
In areas where there are high levels of humidity the membrane dryer with water trap should be used to avoid… more | ||||
| 1 |  | IDG3 membrane dryer with rapid coupling and filter AF20 with water trap | LM9671 | |
| Optional Accessories: | ||||
|---|---|---|---|---|
| 1 |  | Touch Panel KTP700 Basic Trainer Package | CO3713-4Q | |
| 1 |  | IMS manual control unit | LM9638 | |